Parquet gives a home a warmth that tiles can’t: a soft feel underfoot and a calm wood look in bedrooms and majlis rooms. But when you go shopping you discover that “parquet” is not one product: there is HDF, laminate, engineered wood, solid wood, SPC and vinyl. So what is the difference? And what are the parquet flooring types, and which is best for the Eastern Province climate?

The short answer: in most homes in the Eastern Province, SPC is the safest choice because it resists water and humidity; high-quality HDF/laminate is a good budget option for dry bedrooms; engineered wood delivers luxury with better stability than solid wood; and solid wood offers the ultimate luxury, provided humidity is controlled. The details are in this guide.

The Main Parquet Flooring Types

1. HDF / Laminate Parquet

Boards made of high-density compressed wood fibers (HDF), topped with a printed wood-look sheet and covered with a scratch-resistant protective layer.

  • Pros: affordable, many designs, good scratch resistance in high-rated grades, fast installation.
  • Cons: affected by water; leaks or mopping with too much water can make the edges swell.
  • Best for: bedrooms, offices and dry majlis rooms.

2. SPC (Stone Plastic Composite) Parquet

Boards made from a mix of stone powder and PVC, with a design layer and a protective layer, often with a foam backing.

  • Pros: fully waterproof, stable through temperature changes, handles traffic, suitable for kitchens and corridors.
  • Cons: feels cooler and less warm than wood, and quality varies between manufacturers.
  • Best for: almost the whole house, especially areas exposed to water and humidity.

3. Vinyl (LVT)

Flexible vinyl planks, either glue-down or click-lock.

  • Pros: waterproof, quiet underfoot, suitable for commercial spaces.
  • Cons: less rigid than SPC and needs a perfectly level subfloor.
  • Best for: offices, shops and some rooms.

4. Engineered Wood

A top layer of real natural wood (oak, walnut…) over cross-layered wood plies.

  • Pros: the look and feel of natural wood, with far better stability than solid wood under heat and humidity.
  • Cons: high price, and it needs care around water.
  • Best for: majlis rooms, master bedrooms and luxury living rooms.

5. Solid Wood

Boards of natural wood through their full thickness.

  • Pros: the ultimate luxury, and it can be sanded and refinished several times.
  • Cons: the most expensive, and it expands and contracts with humidity changes, which is a problem in the coastal climate of Khobar and Dammam if air conditioning is not stable.
  • Best for: luxury projects with good control of the indoor climate.

Parquet Types Comparison Table

TypeWater resistanceScratch resistanceNatural feelStability with humidityRelative cost
HDF / laminatePoorGood to highMediumMediumLow
SPCExcellentHighMediumExcellentLow to medium
Vinyl LVTExcellentMediumMediumGoodLow to medium
Engineered woodMediumMediumVery highGoodHigh
Solid woodPoorMediumHighestPoorHighest

Terms You Need to Know Before Buying

  • Abrasion class (AC): for laminate. AC3 suits homes, and AC4 – AC5 suits heavy traffic and shops.
  • Board thickness: HDF is usually 8 – 12 mm; thicker boards are more stable and quieter.
  • Wear layer: in SPC and vinyl it is measured in millimeters, and the thicker it is, the longer the floor lasts. 0.3 mm for homes and 0.5 mm or more for heavy traffic.
  • Click system: allows floating installation without glue.
  • Underlay: insulates sound and moisture and compensates for minor floor defects.

Where to Use Parquet and Where to Avoid It

AreaRecommendation
BedroomsGood HDF, SPC, or engineered wood
Majlis and living roomsSPC or engineered wood
KitchensOnly SPC among parquet types
BathroomsParquet not recommended; porcelain is better
Ground floors exposed to rising dampSPC with a moisture barrier
Offices and shopsSPC, LVT or AC4 – AC5 laminate

The Secret of Correct Installation

  1. Check subfloor moisture before installation; a new concrete slab may stay damp for weeks.
  2. Level the floor: differences in level cause a clicking sound and separated joints.
  3. A moisture barrier (polyethylene sheet) under the underlay on ground floors.
  4. Leave an expansion gap around the walls (about 8 – 10 mm), covered by the skirting.
  5. Leave the boards in the room for a day or two before installation to acclimatize.
  6. Transition profiles between large rooms, as the manufacturer recommends.

The most common mistake: installing parquet tight against the walls with no expansion gap, so it buckles in summer.

Can Parquet Be Installed Over Tiles?

Yes in most cases, if the tiles are firmly bonded, level and not hollow. This is one of the most popular ways to renew rooms without demolition. You only need to consider door heights; you may need to trim the bottom of the doors slightly.

Parquet Price per Square Meter Including Installation

TypeApproximate price per m² including installation (SAR)
HDF / laminate 8 mm45 – 80
HDF / laminate 12 mm70 – 120
SPC70 – 150
Vinyl LVT60 – 130
Engineered wood220 – 500
Solid wood350 – 900 and above

Prices are estimates and depend on the brand, country of origin, quantity and the condition of the floor.

Caring for Parquet

  • Mop with a well-wrung damp mop, and never pour water on the floor.
  • Put felt pads under furniture legs.
  • Use mats at entrances to reduce the sand that scratches the surface.
  • Wipe up any spilled liquid immediately, especially on HDF and wood.

Skirting, Profiles and Accessories

Parquet is not complete with boards alone. These accessories make the difference between a professional installation and an ordinary one:

AccessoryRole
SkirtingCovers the expansion gap at walls and protects the base of the wall
Transition profileBetween parquet and another floor at the same level
Reducer profileBetween parquet and a higher or lower floor
End profileAt glass doors or exposed edges
Stair nosingTo install parquet safely on stairs
UnderlaySound and moisture insulation and compensation for minor defects

Choose skirting in the color of the door, wall or parquet depending on the design; taller skirting (8 – 12 cm) gives a more luxurious look.

Choosing a Parquet Color

ColorEffectSuits
Light (light oak, light gray)Makes the space feel larger, modernSmall rooms, modern and Scandinavian designs
Medium (honey, natural oak)Warm and balanced, hides dustMost homes
Dark (walnut, chocolate)Luxurious and classicSpacious majlis rooms and offices; shows dust and scratches more

Tip: in the Eastern Province, where dust is common, medium colors hide dust better than very dark or very light ones.

Installation Direction

  • Parallel to the longest wall makes the room look longer.
  • Parallel to the light coming from the window hides the joints.
  • Diagonal or herringbone installation looks luxurious but increases waste and labor.

Parquet Installation With Us

Through our parquet works service we help you choose the right type for each room based on use and humidity, inspect and level the floor, and install with a moisture barrier, underlay and correct expansion gaps, along with skirting and profiles. If you are comparing parquet with tiles, see our flooring works. We work in Dammam, Khobar, Dhahran and every city in the Eastern Province as part of our general contracting in the Eastern Province services.

Frequently Asked Questions

What is the best parquet color to hide dust?

Medium colors such as honey and natural oak, because they hide dust and scratches better than very dark or very light colors.

In which direction should parquet be installed?

Usually parallel to the longest wall or to the light coming from the window, because this makes the room look longer and hides the joints.

What are the types of parquet flooring?

The most popular are HDF or laminate, SPC, LVT vinyl, engineered wood and solid wood, and each differs in water resistance, price and natural feel.

Which parquet type is best for the Eastern Province?

SPC is the safest because of the humidity, as it is fully waterproof, while engineered wood is best for luxury with good stability.

What is the difference between HDF and SPC parquet?

HDF is made of compressed wood fibers and is affected by water, while SPC is made of stone powder and PVC, is fully waterproof and is more stable with heat.

Is parquet suitable for kitchens?

SPC types are suitable for kitchens because they are waterproof, while HDF and natural wood are not recommended in kitchens.

Can parquet be installed over old tiles?

Yes, if the tiles are firmly bonded and level, taking door heights into account; this is a common way to renovate without demolition.

How long does parquet last?

It depends on the type, quality and use: good laminate can last 10 to 15 years, good SPC a similar time or longer, and natural wood much longer with maintenance.

Choose the Right Parquet for Your Home

Send us the room sizes and a photo of your current floor on WhatsApp, or request a free estimate, and we will suggest the right type and installation price.