
Article contents
If you are thinking of building a rooftop annex, a driver’s room or a warehouse, you have probably heard of sandwich panels as a faster and cheaper alternative to conventional construction. The natural question is: what is the sandwich panel price per square meter in Saudi Arabia in 2026?
The short answer: the price of the panel itself (supply only) ranges roughly from 55 to 160 SAR per square meter depending on the insulation type, thickness and steel sheet, while the cost of a fully built annex (steel frame, panels, floor, doors and windows, electrical and interior finishing) ranges roughly from 700 to 1,400 SAR per square meter of floor area. The gap is large, and in this guide we explain why, describe panel types and thicknesses, and show when sandwich panels are a smart choice and when they are not.
What Is a Sandwich Panel?
A sandwich panel is made of three layers, like a sandwich: two outer skins of painted galvanized steel with an insulating core between them. That insulating core determines the panel’s price and its performance in thermal insulation and fire resistance.
Sandwich Panel Types by Insulation Core
| Core type | Thermal insulation | Fire resistance | Weight | Relative price | Best use |
|---|---|---|---|---|---|
| Polystyrene (EPS / white foam) | Good | Poor | Very light | Cheapest | Simple warehouses, enclosed shades |
| Polyurethane (PU) | Excellent | Medium | Light | Medium to high | Residential annexes, cold rooms, offices |
| Polyisocyanurate (PIR) | Excellent | Good | Light | High | Buildings with stricter fire requirements |
| Rock wool | Good | Excellent (non-combustible) | Heavier | High | Industrial warehouses, high-risk areas |
In the Eastern Province, where summer temperatures exceed 45°C, we recommend polyurethane or PIR panels for residential annexes, because the savings on the AC bill over the years quickly cover the price difference.
Sandwich Panel Price per Square Meter by Thickness
Thickness here means the full panel thickness; the thicker it is, the better the insulation and the higher the price. These are approximate supply-only prices in the Saudi market:
| Thickness | Common use | Approximate price per m² (SAR) |
|---|---|---|
| 40 – 50 mm | Interior walls, simple warehouses | 55 – 85 |
| 75 mm | Exterior walls and annex roofs | 75 – 110 |
| 100 mm | Well-insulated residential annexes, offices | 95 – 135 |
| 150 mm and above | Cold and freezer rooms | 130 – 200 |
Prices are also affected by the outer sheet thickness (0.4 or 0.5 mm), the paint type, the order quantity and the cost of transport to site. Note that steel and building material prices in Saudi Arabia have risen repeatedly during 2026, so always check the date on a quotation.
Cost of a Fully Built Annex
Customers usually don’t buy panels; they want an annex ready to live in. That brings in many other items:
| Item | What it includes |
|---|---|
| Steel structure | Galvanized or painted steel bases, columns and beams |
| Floor | A concrete pour or slab with insulation, or a raised floor on the roof |
| Walls and roof | Sandwich panels with corners and sealing accessories |
| Doors and windows | Aluminum, usually with double glazing |
| Electrical | First-fix for lighting, sockets, AC and a small distribution board |
| Plumbing | If the annex has a restroom or kitchen |
| Interior finishing | Flooring (SPC or porcelain), suspended or gypsum ceiling, wall cladding |
Example: a 25 m² Rooftop Annex
- Economy level (room without bathroom, simple finish): about 18,000 – 25,000 SAR.
- Mid level (room with restroom, good finish): about 25,000 – 35,000 SAR.
- Premium level (fully finished annex with AC and high insulation): from 35,000 SAR upward.
Sandwich Panels or Block Construction?
| Comparison | Sandwich panel | Block and concrete |
|---|---|---|
| Construction time | Usually one to 3 weeks | 6 weeks or more |
| Load on the roof | Very light | Heavy, needs careful structural study |
| Thermal insulation | Excellent with PU and PIR | Needs additional insulation |
| Feeling of solidity | Lower | Higher |
| Can be dismantled and moved | Yes | No |
| Total cost | Usually lower | Higher |
When should you choose sandwich panels? If the roof cannot carry heavy loads, you need speed, or the annex has a specific purpose (driver’s room, storage, temporary office).
When should you choose blocks? If the annex will be a permanent home for a family, or you want the feel of a complete house and better sound insulation. In that case see our annex and extension construction service.
Common Mistakes in Sandwich Panel Projects
- Choosing white foam for living space because it is cheapest, then suffering from heat and weak fire resistance.
- Neglecting the sealing at corners and joints: this is where rain and dust get in and insulation is lost.
- Fixing the annex directly onto the roof waterproofing without proper bases, damaging the waterproofing and causing leaks to the floor below.
- Very thin steel sheet that dents and rusts in the coastal climate.
- Not checking municipality requirements for annexes before building.
Steps to Build a Rooftop Sandwich Panel Annex
Because rooftop annexes are the most common use of sandwich panels in villas, here are the correct steps as we carry them out:
- Roof inspection: the condition of the existing waterproofing, the positions of columns and beams the structure can bear on, and the roof’s load capacity.
- Set the bearing points: the structure’s bases should ideally sit over columns or beams, not in the middle of the slab.
- Protect the existing waterproofing: any hole drilled in the roof to fix the bases must be sealed with local waterproofing so water does not leak to the floor below.
- Install the steel structure: galvanized columns and beams, or painted with anti-rust coating, with a roof slope for rainwater drainage.
- Floor: usually a raised floor or a light insulated slab, not a heavy pour on the roof.
- Install the panels: walls first, then the roof, sealing the joints with flashing strips, silicone and purpose-made corners.
- Doors and windows: aluminum with double glazing to keep the insulation intact.
- Services: electrical cables in concealed conduits or behind cladding, and AC drainage kept away from the panels.
- Interior finishing: SPC or light porcelain floors, a suspended or gypsum board ceiling, and wall cladding if you wish.
- Rain test: spray the annex with water from outside to confirm there are no leaks before handover.
How to Compare Quotations
Two quotations for an annex of the same size may differ by ten thousand riyals or more, and the cheapest is not necessarily the best. Compare:
| Item | What to ask about |
|---|---|
| Insulation type | PU, EPS or rock wool? |
| Thickness | 50, 75 or 100 mm? |
| Sheet thickness | 0.4 or 0.5 mm? |
| Structure | Steel section sizes and rust protection type |
| Floor | Its type and how it is insulated |
| Windows | Single or double glazing? |
| Warranty | Its duration and what it covers |
How We Deliver Sandwich Panel Projects
Through our sandwich panel construction service we inspect the roof or land first, select the panel type and thickness for the intended use, then deliver the structure, installation, interior finishing, electrical and plumbing under a single contract, taking care not to damage the existing roof waterproofing. We build rooftop annexes, driver’s rooms, warehouses and cold rooms in every city of the Eastern Province as part of our general contracting in the Eastern Province services.
Frequently Asked Questions
Do sandwich panels insulate sound?
They insulate sound to an acceptable degree, but less than a block wall; sound insulation can be improved with interior cladding and rock wool.
Do sandwich panels rust in coastal climates?
Good painted galvanized steel resists rust for many years, but cut edges and screws must be treated and sealed.
How much does a sandwich panel cost per square meter in Saudi Arabia?
Supply-only panel prices range roughly from 55 to 160 SAR per square meter depending on insulation and thickness, while a fully built annex ranges from 700 to 1,400 SAR per square meter of floor area.
What is the best sandwich panel type for residential annexes?
Polyurethane (PU) or PIR panels 75 to 100 mm thick, because they combine excellent thermal insulation, light weight and better fire resistance than white foam.
Can sandwich panels handle the summer heat in the Eastern Province?
Yes, if the core is PU or PIR of a suitable thickness and the joints are sealed well; in fact their insulation is better than an uninsulated block wall.
How long does a sandwich panel annex last?
With good galvanized steel, correct installation and simple maintenance, it can last 20 years or more.
Does a sandwich panel annex need a permit?
Usually yes, and you should check your local municipality’s requirements before building, as they vary by building type and location.
How long does it take to install a sandwich panel annex?
A small annex can be finished within one to three weeks including finishing, depending on the size and site readiness.
Get an Accurate Price for Your Project
Send us the area, intended use and a photo of the site on WhatsApp, or request a free estimate, and we will give you an initial estimate followed by a site visit and a detailed quotation listing panel type, thickness and every item.