The first question a doctor or investor asks before leasing a unit for a clinic is how much will the fit-out cost? The honest answer depends on three things: the unit’s condition at handover (shell or basic finish), the clinic type (general, dental or physiotherapy) and the finishing tier. This article gives figures calculated from our price guide, using the same method as the quote form on our site.

Clinic fit-out price per m²

For a quick planning figure, a full clinic fit-out from shell costs SAR 1,800–3,200 per m² before VAT in the Eastern Province market. The range reflects materials (local or imported vinyl, standard or antibacterial doors, standard or medical lighting) and clinic type.

That figure covers partitions, floors, ceilings, paint, services, toilets, doors and shopfront, and excludes medical equipment and furniture.

Worked example: a 150 m² clinic from shell

An estimate for a 150 m² general clinic with about six exam rooms, reception, waiting and two toilets, calculated item by item from the guide:

ItemQuantityEconomyMid-rangeLuxury
Full bathroom renovation (plumbing, waterproofing, tiles)2 bathroom (4–6 m²)23,00040,00064,000
Interior door10 door9,00018,00035,000
Vinyl flooring for offices & clinics150 m²12,75016,50021,000
Internal plastering563 m²11,81015,19018,000
Interior painting with full putty420 m² wall9,24014,70021,000
Gypsum board partition wall120 m²8,40012,00015,600
Electrical point90 point7,65011,70015,300
Windows18 m²6,84011,70017,100
Suspended 60×60 tile ceiling for offices135 m²9,45011,48014,850
LED spotlight installed53 piece2,1204,2405,830
Skirting105 linear m1,7903,9905,780
Water-resistant WPC door2 door1,6002,3002,900
Split AC first-fix (copper & drain)6 point1,3802,2803,000
Network / data point10 point1,0001,5002,000
Plumbing point (supply & drain)6 point9001,4401,920
Total (before VAT)106,930167,020243,280
Average per m²7131,1131,622

Calculated the same way as our online quote form, from the current price guide (SAR, before VAT, Eastern Province). Quantities are estimates confirmed at the free site visit.

The largest items are usually partitions, ceilings and floors, then toilets, then electrics and AC, which are where it pays to choose the tier carefully.

What makes a dental clinic more expensive?

A dental clinic costs more to fit out than a general clinic of the same size because of:

  • Services under every chair: water, drain, compressed air and suction, run before the floor; any change afterwards means breaking it up.
  • A compressor and suction room with acoustic insulation and good ventilation.
  • A sterilisation room with basins and easy-clean surfaces.
  • An X-ray room that may need special wall lining depending on the equipment and the competent authority’s requirements.
  • Higher power capacity and a dedicated equipment board.

So we recommend adding a contingency for dental clinics on top of the example above, and fixing the number and models of chairs before services start.

Key item prices

ItemUnitEconomyMid-rangeLuxury
Gypsum board partition wallm²60–80100130
Vinyl flooring for offices & clinicsm²70–95110140
Suspended 60×60 tile ceiling for officesm²60–7585110
Plumbing point (supply & drain)point120–180240320
Electrical pointpoint70–100130170
Network / data pointpoint80–120150200
Split AC first-fix (copper & drain)point180–280380500
Interior doordoor700–1,1001,8003,500
Full bathroom renovation (plumbing, waterproofing, tiles)bathroom (4–6 m²)9,000–14,00020,00032,000

SAR before VAT, materials and labour, Eastern Province market. Prices update automatically from our price guide.

How to split a clinic fit-out budget

Do not treat every item equally. Invest in what is inspected at licensing and hard to change later: plumbing and basins, seamless floors, electrics and AC. Save on what can be upgraded later without breaking anything: decorative paint, reception lighting and shopfront details.

The costliest mistakes:

  1. Leasing a unit unsuited to a clinic (distant drainage, or a ceiling too low for suspended ceilings and AC).
  2. Starting before the layout is approved, then moving rooms and basins after services.
  3. Ignoring the accessible toilet and ramp, then adding them after the licensing visit.
  4. Choosing a jointed floor in exam rooms, then replacing it.

How long does it take?

A 100–200 m² clinic usually takes 6–10 weeks from the start of works. Build this into the rent-free period of your lease if possible, because every month of delay is rent without income.

Before you start

See our clinic fit-out and finishing service for Dammam, Khobar and Dhahran, and all item prices in our price guide. If the clinic is part of a larger commercial project, see commercial projects.

Frequently asked questions

How much does a 100 m² clinic fit-out cost?

Multiply the area by the price per m² (SAR 1,800–3,200 per m²) for a quick estimate, or price it item by item in the quote form for a more accurate result based on room count.

Does the cost include medical equipment?

No, it covers the fit-out, finishes and services only; equipment and furniture are separate.

Why is a dental clinic more expensive?

Because of water, drain, air and suction lines under every chair and the compressor, sterilisation and X-ray rooms.

What is the biggest cost item in a clinic?

Usually partitions, ceilings and floors together, then toilets, electrics and AC.

Can a clinic be set up in a villa?

Usually yes, once licensing requirements for the location are confirmed, with drainage and toilet changes and a ramp.

Want a price for your own project? Get your quote now using the same method as this article, book a free site visit, or ask Sanad, our AI assistant.