Taken over a warehouse or workshop? You will usually find an empty shell: a rough concrete floor, weak lighting, insufficient power, and no office or toilet. Before operating you need an interior fit-out, and its cost varies widely by activity. This article gives calculated figures for fitting out a storage warehouse and a car workshop in the Eastern Province.

Warehouse fit-out per m²

A basic warehouse fit-out (floors, lighting and partitioning) costs SAR 150–400 per m² depending on floor type and lighting density. Items are added as needed: an office, toilets, garage doors and CCTV.

Example 1: a 900 m² warehouse with office and toilet

ItemQuantityEconomyMid-rangeLuxury
Warehouse fit-out (floors, lighting, partitions)900 m²180,000279,000360,000
Full bathroom renovation (plumbing, waterproofing, tiles)2 bathroom (4–6 m²)23,00040,00064,000
Gypsum board partition wall40 m²2,8004,0005,200
Water-resistant WPC door2 door1,6002,3002,900
Split AC first-fix (copper & drain)1 point230380500
Total (before VAT)207,630325,680432,600
Average per m²231362481

Calculated the same way as our online quote form, from the current price guide (SAR, before VAT, Eastern Province). Quantities are estimates confirmed at the free site visit.

Example 2: a 300 m² car workshop

ItemQuantityEconomyMid-rangeLuxury
Epoxy flooring300 m²15,00025,50034,500
Full bathroom renovation (plumbing, waterproofing, tiles)1 bathroom (4–6 m²)11,50020,00032,000
Interior painting with full putty416 m² wall9,15014,55020,790
Linear lighting in aluminium profile45 linear m8,55012,60016,200
Automatic garage door1 door7,80012,50016,000
Internal plastering416 m²8,73011,22013,300
Electrical point36 point3,0604,6806,120
Water-resistant WPC door1 door8001,1501,450
Split AC first-fix (copper & drain)3 point6901,1401,500
Total (before VAT)65,280103,340141,860
Average per m²218344473

Calculated the same way as our online quote form, from the current price guide (SAR, before VAT, Eastern Province). Quantities are estimates confirmed at the free site visit.

Floors: epoxy coating or self-levelling?

The floor is the biggest warehouse item, and the choice depends on load:

  • Epoxy coating: for light storage and manual handling; stops dust and is easy to clean.
  • Self-levelling epoxy: for forklifts and vehicles; resists impact and abrasion.
  • A levelling screed first: if the floor is uneven or cracked.

Epoxy costs SAR 40–115 per m² and screed SAR 25–40 per m².

Lighting and power

Warehouse lighting is calculated from ceiling height and aisle width so staff can read labels clearly without shadows. Workshop power is sized by equipment: compressors, car lifts, welders and diagnostic equipment, each needing a dedicated circuit.

ItemUnitEconomyMid-rangeLuxury
Epoxy flooringm²40–6085115
Floor screedm²25–313440
Linear lighting in aluminium profilelinear m150–220280360
Electrical pointpoint70–100130170
Distribution board with breakerspanel1,500–2,4003,1004,000
Gypsum board partition wallm²60–80100130
Automatic garage doordoor6,000–9,60012,50016,000
CCTV camera installedcamera350–6008501,100
Full bathroom renovation (plumbing, waterproofing, tiles)bathroom (4–6 m²)9,000–14,00020,00032,000

SAR before VAT, materials and labour, Eastern Province market. Prices update automatically from our price guide.

What a car workshop specifically needs

  • Oil-resistant epoxy floors with falls to drains.
  • Oil separators in drainage before the public network.
  • Exhaust ventilation.
  • Garage doors of suitable width and height.
  • A clean, air-conditioned customer reception.

Mistakes that raise the cost

  1. Thin epoxy under lifts that peels within months.
  2. Too little lighting, doubled later at higher cost.
  3. Power not sized for equipment, causing trips and damage.
  4. Ignoring emergency exits and extinguishers, then changing them after the Civil Defence visit.

Start the fit-out

See our warehouse and workshop interior fit-out service, epoxy flooring for specialist floors, and sandwich panel construction for the building itself; all prices are in our price guide.

Frequently asked questions

How much does a warehouse interior fit-out cost?

SAR 150–400 per m² depending on tier; the article includes a full example for a 900 m² warehouse.

What does warehouse epoxy cost per m²?

SAR 40–115 per m² depending on thickness and system.

Does the cost include racking and forklifts?

No, it covers fit-out, finishes and services only.

What does a car workshop need?

Oil-resistant floors, oil separators, ventilation, garage doors and power for equipment.

How long does a warehouse fit-out take?

A medium warehouse takes 3–6 weeks depending on size and floor type.

Want a price for your own project? Get your quote now using the same method as this article, book a free site visit, or ask Sanad, our AI assistant.