Plaster is the layer nobody talks about, yet everything that comes after depends on it: paint, profile, ceramic, and even how straight door frames are. If the plaster is wavy, hollow or cracked, no paint in the world will hide it. That’s why choosing a plastering contractor in Madinah is a decision that affects how the whole house looks for years.

In this article we explain plaster types, the difference between interior and exterior plaster, the steps that give you a level wall, the challenge of Madinah’s dry climate, and approximate prices.

Plaster Types

  • Traditional cement plaster: sand, cement and water; the most widespread inside and out.
  • Gypsum plaster: interior only, smoother and faster, often used on ceilings and interior walls.
  • Ready-mix plaster: factory mixes in fixed proportions that reduce variation between batches.
  • Machine plaster: sprayed by machine, suited to large projects.

What Makes Plaster Good?

CriterionHow it’s achievedWhat happens if neglected
FlatnessLevel dots and screedsWavy walls that show under lighting
StraightnessMetal corner beads at cornersCrooked, broken corners
BondA spatter dash coat before plasteringHollow plaster that comes away
No crackingWater curing after applicationShrinkage cracks
JunctionsMesh where concrete meets blockworkStraight cracks at columns

The Correct Plastering Steps

  1. Cleaning the wall and wetting it.
  2. Spatter dash: a rough coat that helps the plaster bond, especially on smooth concrete.
  3. Level dots and screeds: guide points and strips of calculated thickness that ensure flatness.
  4. Mesh where columns and beams meet blockwork and around service chases.
  5. Metal corner beads on external corners.
  6. Application in one or two coats depending on the required thickness.
  7. Water curing for several days so it doesn’t dry too fast.

The Challenge of Madinah’s Dry Climate

Dry air and heat draw water out of plaster very quickly, especially on sun-exposed facades. That’s why we recommend:

  • Working on west-facing facades in the morning and east-facing ones in the afternoon.
  • Regular water spraying after application.
  • Not plastering during peak heat hours in summer.
  • Using water-retention additives in the mix when needed.

Approximate Prices in Madinah

  • Interior plaster: 18 to 30 SAR per m².
  • Exterior plaster: 22 to 38 SAR per m².
  • Plaster with profile for facades: 45 to 75 SAR per m².
  • Interior gypsum plaster: 20 to 35 SAR per m².

How Do We Work as a Plastering Contractor in Madinah?

We work with level dots, screeds and metal corner beads, place mesh at junctions, cure the plaster with water after application, and schedule work around the sun. Service details are under plastering and facade profiles, and if the facade will be finished with profile, see our article on the profile contractor in Madinah.

Frequently Asked Questions About Plastering Contractors in Madinah

What is the price per meter of plaster in Madinah?

Roughly 18 to 30 SAR per m² inside, and 22 to 38 SAR per m² outside, depending on thickness and height.

Why does plaster crack after application?

Usually because of fast drying without water curing, no mesh where concrete meets blockwork, or an inconsistent mix.

What is the difference between cement plaster and gypsum plaster?

Cement plaster is used inside and out and tolerates moisture, while gypsum plaster is interior only, smoother and faster to apply.

How do I know if plaster is hollow?

By tapping the wall lightly; a hollow sound means the plaster has separated from what’s beneath and needs redoing.

How long must plaster dry before painting?

It’s best to wait until it is completely dry, often weeks depending on thickness and weather, following the instructions of the materials used.

A Level Wall Starts Here

Request a free estimate for plastering works in Madinah, or book a site visit so our team can measure the areas.