A level, solid surface is the foundation of any paint or decor that lasts
We carry out interior and exterior plastering and facade texture finishes in Dammam, Khobar, Dhahran and Qatif, using dots and screeds for level walls and straight corners, with materials that resist Eastern Province humidity.
The quality of paint, gypsum and tiles starts with the plaster. A wavy wall or crooked corners will show under any paint, however expensive. And plaster made with the wrong mix will crack in the summer heat or blister with humidity.
We carry out plastering and facade texture works in Dammam, Khobar, Dhahran and Qatif for villas, residential buildings and commercial buildings. We use the dots and screeds method for interior plaster to keep rooms square and walls straight, and we fit metal mesh corner beads to protect the corners from chipping.
On facades we apply textured finishes of every type, choosing elastomeric types that resist humidity and salinity in coastal cities, because the facade is the first thing to suffer from sea humidity.
A texture finish is a thicker, textured layer that hides wall defects and lasts longer, while paint is smoother and cheaper but needs renewing sooner.
Usually because no mesh was placed where concrete meets blockwork, the plaster wasn't sprayed with water after application, or the mix was unsuitable.
Interior and exterior plastering of a medium villa usually takes 3 to 5 weeks.
Yes, provided an elastomeric, humidity-resistant texture is used over a suitable base coat.
Yes, we repair specific areas of damaged plaster without re-plastering the whole wall if its condition allows.

تفاصيل الخدمات ضمن Plastering and Facade Texture Works

Plastering walls and ceilings with dots and screeds, with mesh where concrete meets blockwork to prevent cracks.

Plastering facades with a mix suited to outdoor conditions, with good water curing to avoid cracking.
The dots and screeds method gives a result that needs little filler.
Mixes and additives that reduce cracking and the effects of humidity.
Elastomeric types that handle expansion and contraction and resist salinity.
Plasterers with long experience on villas and facades.
We follow a clear method to guarantee the best results
Cleaning the wall, fitting mesh and corner beads, and applying a spatter dash coat to improve adhesion.
Setting the level and straightness of the wall with dots and screeds before plastering.
Applying plaster at the right thickness and leveling it with a straightedge.
Spraying the plaster with water over consecutive days to prevent cracking, especially in summer.
Applying the texture finish on facades, or handing over interior walls ready for filler and paint.
Need plastering for a new villa or a texture finish for your home's facade? Request a free site visit in Dammam or Khobar.
General contracting, finishing, renovation and decor in the Eastern Province and Madinah: from a free site visit and bill of quantities to handover under a formal contract.